SMT Equipment

Best-in-Class Flexibility Solutions for Electronics Manufacturing

Plugs

LCD Laser Repair Machine ZM-810

Seamark New LCD Laser Machine ZM-810, the purpose of repair is further hope to be able to correct the defective part, make originally filtered to throw away waste products, to patch the acceptable products. At the current acceptable product standards, the first is absolutely no color line defect; Second, at present many products have highlight the "no spot guarantees", therefore cannot have a pixel is always shine bright spot, but it can be a way to accept a few dark spots. So the object of laser repairing, mainly on color line defect and bright spot.

High-end technology

High efficiency

High repair rate

Low cost

Key Features & Benefits

Seamark New LCD Laser Repair Machine ZM-810:

LCD screen laser repair machine (hereinafter referred to as laser machine), in the LCD screen maintenance industry is at high-end technology of repairing,  is the most high-end technology. In the LCD screen repair area except COF losing welding, TAB burnt (the fault with can be repaired by bonding machine) other such as bright line, half line, point, line, coarse, multi-line can use laser machine to repair. Laser machine in the LCD screen repair process has high efficiency, high repair rate, low cost (the same fault in the laser machine does not need to replace parts, not only save cost but also improve repair rate not influenced by lack accessories) etc, and widely used by large production factory, brand after-sales and maintenance of the company as a main screen equipment.

Mount base confidential steel base

  • X, Y effective stroke 1250 mm X 900 mm
  • X, Y axis drive form with servo motor system confidential screw
  • X, Y minimum resolution of 1 um/pulse
  • Less than or equal to 5 um reproducibility
  • Z axis range of 100 mm
  • The Z axis driver form with servo motor system confidential screw
  • The Z axis minimum resolution 0.1 um/pulse
  • (Will be subject to the actual design configuration.)

Optical imaging system

  • Microscope: observation/laser processing and special
  • The CCD: 1/2 "color CCD
  • Fall shoot the light source, high brightness halogen light source system: (100 w)
  • Transmission light source, high brightness halogen light source system: (150 w)
  • Guide Light high brightness halogen Light source system: (100 w)
  • Objective switching system: 4 hole/electric switch mode (linear)
  • Precision optical lens group: 5x, 10x, 20x, 50x (the latter two have observed/laser processing function).

Shenzhen Zhuomao Technology Co.,Ltd. have been in design, manufacture, and sale bga rework station, xray inspection machine and LCD laser repair machine for more than 15 years,

You may have noticed we have customer all over the world, including Acer, Huawei, NVIDIA, LENOVO, SANMINA-SCI, GIGABYTE and SAMSUNG,TP-LINK, Flextronics, DELTA, SONY, and so on.

Specifications

ModelZM-810
Power supplyvoltage 220V(110V optional)
Exterior size1800 mm * 1200 mm * 1600 mm
(the actual design shall prevail)
Work platform1490 mm X 1100 mm
Machine weight600KG
Working environment  temperature20 ºC~30 ºC + / - 5 ºC
Work environment
relative humidity
65 + / - 5% RH
Laser systemVD control system
LASER typesND YAG LASER
Wave length
(optical wavelength)
1064/532 nm double wavelength (532 nm for adjust)
Cooling methodWater-cooled/air-cooled
laser power3-8 mj/Pulse
Vibration frequency1 ~ 20 Hz/seconds
The maximum
peak power
1mW
1064 wave amplitude8 ~ 6 nsec
Output power control:512 steps for 0-100% Hi/Low switch - able
Flash Lamp Life Time:1year or greater than 1000000 shots
Laser oscillator
warranty period:
1 year
Interface:RS - 232
Other name:Laser machine
Processing load and X/Y/Z axis driving system
Load material precision grinding optical glass platform.
For maximum 65 inch LCD panel screen size.
Point (3 um X 3 um), line (50 um long X 3 um), block (50 um X 50 um) repair
To repair the mist of polarizing film containing the LCD panel
Dual display electronic brake light red and red box
Light gate size and the parameters of the lens ratio and laser power storage and use
The actual laser configuration specifications shall prevail

Have Questions?

We're always on call to solve your problem

  • Will you provide on-site support ?

    Our team of qualified and experienced engineers is available for on-site maintenance and repair support. you can reach us through online chatbox, skype, Whatsapp, phone call and email, we're always on call to help you solve the problems.

  • Any training will be provided ?

    We offer complete training programs for all of our Pick and Place Machine, Reflow Equipment, Wave and Selective soldering equipment at our Shenzhen, Suzhou facility and also provide on-site training at customer locations.  Our programs are designed to provide your engineers, technicians and machine operators with the operation and maintenance knowledge they need to get the best performance out of our machines.

  • Where can I get spare parts ?

    You can visit our spare parts store to get the parts you need, payment by Paypal/credit card is available. besides, you can contact us for the parts, payment by Bank transfer is available.

Wiring

Request A Quote Today

...

Reach Us

  • Location :

    Fuyong, Bao'an, Shenzhen. 518103. China

  • Email :

    info@seamarksmt.com

  • Phone :

    +86 156 0298 9546

    We will answer your email shortly!

    Scroll to Top